SIZE: 12 1/2" wide, 18" tall, 15" deep with a 12" wide X 11" tall shooting area or 18 1/2" wide, 27" tall, 24" deep with a 18" wide X 18" tall shooting area.

CONSTRUCTION: 16 gauge steel with (4) 10 gauge stainless steel swinging targets and 2 clips for paper.

 

22 cal. TRAP

SIZE: 12 1/2" wide, 18" tall, 15" deep with a 12" wide X 11" tall shooting area.

CONSTRUCTION: 1/4" steel back and front with 10 gauge sides and (4) 1/4" stainless steel targets and 2 clips for paper.

 

LARGER cal. TRAP

( HANDGUNS UP TO 44 MAG. & MUZZLE LOADERS UP TO 54 cal.)

SIZE: 12 1/2" wide, 18" tall, 15" deep with a 12" wide X 11" tall shooting area.

CONSTRUCTION: 1/2" Hard plate front and back with 10 gauge sides. Complete trap comes with (3) 1/2" stainless steel targets and 2 clips for paper. Trap only comes with 2 clips for paper.

 

INCLOSED TRAP

( FOR THE TESTING OF GUNS ONLY )

 

SIZE: 46" tall,12" wide, 28" deep. With brass catcher size is 61" tall, 12" wide, 28" deep.

CONSTRUCTION: 6" pipe with 1/2" rod handle and 4 caster wheels. Brass catcher is 10 gauge steel with 1/4" LEXON Plexiglas and a cloth bag.

OBJECT: Before you start make sure that there is 8" to 10" of sand in the bottom of the pipe. You hold the gun up to the rubber gasket and shoot a hole into the rubber on the X. After you have a hole in the rubber place the muzzle of the gun into the hole and shoot. If you are using the brass catcher attachment you pass the muzzle of the gun through the outside hole into the rubber gasket in the pipe. The brass catcher attachment quiets the sound of the gun down so that your neighbors can not hear you shooting. The main purpose of the brass catcher is to keep the brass from flying all over the place.